daikcell 15 KVA COPPER 130V-300V Mainline Heavy Duty Voltage Stabilizer For Home 12000W – 60 Amps Load – Single Phase – DSR020

daikcell 15 KVA COPPER 130V-300V Mainline Heavy Duty Voltage Stabilizer for Home 12000W for Single Phase With Changeover MCB/Powers all Home Appliances, 5 Years Warranty

•  
• Comprehensive Appliance Protection: This stabilizer has a full protective design which safeguards appliances and electronics from Over Voltages, Under Voltages, Short-Circuits, and Overloads. It automatically disconnects the power in the event of hazardous fluctuations, ensuring optimum functionality and extended life of the appliances.
• Advanced Technology for Stable Power: This stabilizer has inbuilt Zero-cross switching tech and a Toroidal Transformer which works like a 15 kva servo stabilizer single phase. With this, the stabilizer is able to provide accurate and stabilized power which decreases the chance of damage from unstable fluctuations in voltage.
• Informative Digital Display: The Informative Digital LCD Display shows the input and output voltage and also indicates High (Hi) and Low (Lo) with the added functionality of a 5 seconds initial time delay for performance monitoring.
• Convenient Dual MCB with Changeover: On the front panel, there are two MCBs. The first MCB is a Main On/Off Switch for the stabilizer and the second is a Changeover/Bypass switch that after the stabilizer or in case of an emergency, allows direct use of the grid power supply without any power cut delays.
• Tough and Simple Setup: This stabilizer is designed so that it can be installed very easily and has a compact and high-tensile metal cabinet for extended life. The clearly marked detail which correspond to two input wires, two output wires, and one earthing wire makes everything much simpler.  
• Free 5-Year Warranty.

Product details

• MRP: 39,999 INR – All prices listed on our website are inclusive of taxes
• Package Dimensions: 59 x 43 x 35 CM
• Item Weight: 36 kg
• Country of Origin: India
• Marketed By: daikcell India Private Limited, Pillar No. 680 Plot No.1 Morta Industrial Area, Ghaziabad, Uttar Pradesh, 201001 

      ⇒ Customer Care Email – [email protected] & Phone: +918954021654

 

 

Standard Technical Specifications

Output Voltage Range	200V-240V +/- 5% (190V Lowest & 252V Highest)
High Voltage Cut Off	280V Cut Off (Recovery @ 300V)
Initial Time Delay	5 to 10 seconds
Frequency	50 Hz. +/- 2 Hz.
By-Pass / Changeover	via MCB (To be turned on 1 MCB at a time)
Operation	Fully Automatic
Technology	Relay Type
Display Type	Digital
Display Parameters	‘Lo’ for Low voltage, ‘Hi’ for High Voltage
Voltage Display	‘IP’ for Input, ‘OP’ for Output
Idle Power Consumption	Less than 10 watts*
Recommended MCB	Use only ‘C’ Series MCB at your Distribution Box before connecting the stabilizer
Manufactured By	Govind Electricals, Plot no. 72, 172, Khasra No. 1189, North West Delhi – 110033, [email protected]
Cooling	Air Cooling
Wire Size	8 square mm.
MCB Type	C64